16-20 Toyota Tundra 2/4Wd 6in Suspension Lift Kit 75271

You'll never look at a Tundra the same way after installing Rough Country's 6-inch Toyota Tundra kit. This all-inclusive kit is a total transformation for your truck, with durable lifted knuckles, protective skid plate, and all the brackets and hardware needed to set your truck to a factory-like geometry while providing additional ground clearance.

The beefy front crossmember features a high-clearance design to help traverse off-road obstacles with no hang-ups. Run larger wheels and tires while giving your truck a one-of-a-kind look and exceptional off-road performance. This kit affords your truck an aggressive appearance and a higher profile that is sure to demand attention.

This kit includes Rough Country's Nitrogen-charged N3 Shocks for the ultimate balance in highway ride quality and off-road vibration dampening. Includes Rough Country's Lifetime Replacement Guarantee.

Features:

• Unmatched ground clearance due to high clearance crossmember design
• 100 percent precision laser cut materials used in latest computer aided design process
• Levels the front with the rear of the vehicle
• Will work with factory 18-inch or larger wheels
• Requires no modification to the stock differential mounts, drivetrain or exhaust
• Lifted front struts help maintain smooth, factory-like ride
• Front struts are structurally engineered for lifted applications
• Front struts are lifted 6-inches, eliminating the need for strut spacers
• Fabricated blocks are stronger and offer a longer lifespan than cast blocks

Notes:

• Cutting and drilling is required
• Does Not fit TRD Pro Series models
• Does Not fit XSP-X models
• Requires 18-inch or larger wheels
• Stock 18-inch or larger wheels can be used but can accommodate tires no wider than 11.5-inch
• In some cases minor trimming may be needed to clear 35-inch tires
• Please view instructions for complete information on proper tire, wheel combinations

Details:

• Sold As Kit
• Drive 2WD|4WD
• Tire Info 35x12.50 R18:18x8.5:6.1875.0 inch-
• Max Tire 35.0 inch
• Lift Height 6.0 inch
• Front Components Lifted knuckles N3 Lifted Struts Front crossmember Rear crossmember Steering stops Brake line brackets Differential drop brackets Bumpstop brackets Sway-bar brackets Lower skid plate Hardware
• Rear Components Fabricated lift blocks U-bolts Brake line brackets Hardware

The Manufacture or Brand name of the product is: 6 Inch Lift Kit | N3 Struts/V2 | Toyota Tundra 4WD (2016-2021)

Features:

• Unmatched ground clearance due to high clearance crossmember design
• 100% precision laser cut materials used in latest computer aided design process
• Levels the front with the rear of the vehicle
• Will work with factory 18-inch or larger wheels
• Requires no modification to the stock differential mounts, drivetrain or exhaust
• Lifted front struts help maintain smooth, factory-like ride
• Front struts are structurally engineered for lifted applications
• Front struts are lifted 6-inches, eliminating the need for strut spacers
• Fabricated blocks are stronger and offer a longer lifespan than cast blocks

Installation time: 8-10 hours

Notes:

• Cutting and drilling is required
• Does NOT fit TRD Pro Series models
• Does NOT fit XSP-X models
• Requires 18-inch or larger wheels
• Stock 18-inch or larger wheels can be used but can accommodate tires no wider than 11.5-inch
• In some cases minor trimming may be needed to clear 35-inch tires
• On vehicles equipped with a two-piece driveshaft, there is the potential for take-off vibration, which can be corrected with SKU: 1776BOX1 carrier bearing shim kit
• Please view instructions for complete information on proper tire/wheel combinations