17-22 Ford SD 4-Link 6in Coilover Conv Lift Kit C/O Vertex 4in Axle DS

<h2>Product Description</h2> <p>Upgrade your fourth-generation Ford Super Duty with the Rough Country's 4-Link Coilover Conversion Lift Kit. This kit is designed to provide superior ride quality, ride height adjustability, increased dampening, and an impressive look. It features a 4-Link setup with durable, fixed upper arms and adjustable lower control arms. The kit also includes radius arm drop brackets for maintaining proper geometry and caster setting, crucial for maintaining factory handling.</p> <h2>Durable Components</h2> <p>The 6" 4-Link Coilover Conversion Lift Kit from Rough Country features top-mounted reservoir brackets and coil-over mounts made from 1/4-inch steel. The kit replaces the factory independent coil shock and coil set-up with a massive 2.5in piston, nitrogen-charged, 8-stage adjustable Vertex Coilover. The Vertex Coilovers feature a monotube design with an external reservoir for increased oil capacity and damping sensitivity. The 2.5in piston design offers a 56% greater fluid capacity than the average reservoir shock.</p> <h2>Installation</h2> <p>The kit requires cutting and drilling for installation, with an estimated timeframe of 6-10 hours. It can be installed at home efficiently and quickly.</p> <h2>Warranty</h2> <p>Rough Country's 4-Link Coilover Conversion Lift Kit comes with a limited lifetime replacement warranty against manufacturer defects. This ensures protection from structural and workmanship damage after the date of purchase.</p> <h2>Product Features</h2> <ul> <li>Easy bolt-on installation</li> <li>Increased ground clearance</li> <li>Levels the front with the rear of the vehicle</li> <li>Radius arm drop brackets allow for properly set caster</li> <li>Proper caster is crucial to maintaining factory handling and driveability</li> <li>Fabricated blocks are stronger and offer a longer lifespan than cast blocks</li> <li>Specially designed anti-axle wrap rear blocks maintain stock ride quality while eliminating common lift block problems</li> </ul> <h2>Notes</h2> <p>This kit does not fit gas engine models, manual shift transfer cases, dually models, or models equipped with the Tremor Factory Trim Package. Models equipped with a 10-speed transmission must remove the dial pin. The new fabricated lift block replaces the factory equipped lift block.</p> <h2>Manufacturer's Description</h2> <p>The Rough Country 50859 6 Inch Lift Kit offers easy bolt-on installation and increased ground clearance. It levels the front with the rear of the vehicle and allows for properly set caster. The kit includes fabricated blocks that are stronger and offer a longer lifespan than cast blocks. It also features specially designed anti-axle wrap rear blocks that maintain stock ride quality while eliminating common lift block problems.</p>