93-98 Jeep ZJ 4in Suspension Lift Kit 90222

Product Features:

• Aggressive appearance
• Increased ground clearance
• HD 0.25 inch thick crossmember
• Lower control arms feature high clearance design
• Front adjustable track bar is made of forged solid steel for unsurpassed strength and durability
• Extreme travel long arms keep optimum alignment and give optimum articulation
• X-Flex control arm features:
  • Clevite brand OEM style rubber bushings
  • Flex joints feature a massive 2.5 Inch diameter body and 1.25 inch thread
  • Fully greasable
  • Upper joints pivot up to 20 degrees
  • Lower joints pivot up to 35 degrees

Notes:

• Does Not fit AWD models.
• Transfer case skid plate Will Not fit models equipped with 249 transfer case.
• Exhaust will have to be cut and rerouted to make sure it is away from the moving components.
• Models equipped with a CV style front driveshaft may result in driveshaft vibration.
• If this occurs, replacing the driveshaft, axle yoke and, or transfer case yoke will need to be performed to rid the vehicle of driveline vibration.
• CV Driveshaft Example

Details:

• Sold As Kit
• Material: Forged Steel
• Drive: 4WD
• Lift Height: 4.0 inch
• Mount Style: Bolt On
• Thickness: 0.25 inch
• Front Components: Lifted coil springs, Adjustable upper control arms, Adjustable lower control arms, Crossmember, Transfer case skid plate, Sway-bar quick disconnects, Forged Adjustable track bar, Track bar bracket, 3 Inch Bumpstops, Hardware
• Rear Components: Lifted coil springs, Adjustable upper control arms, Adjustable lower control arms, Long arm frame brackets, Track bar bracket, Bumpstop brackets, Brake line brackets, Hardware