Description
Actual Product May Vary
Product Info
Superior Ride Quality. Upgrade your fourth-generation Ford Super Duty with Rough Country's 4-Link Coilover Conversion Lift Kit for an impressive ride quality. This kit offers ride height adjustability, increased dampening, and a unique appearance that will make you stand out. The innovative design allows you to replace your factory arms with a 4-Link setup, using durable fixed upper arms and adjustable lower control arms. Radius arm drop brackets maintain proper geometry and caster setting for factory handling.
Durable Components. The 6" 4-Link Coilover Conversion Lift Kit features top-mounted reservoir brackets and coil-over mounts made from 1/4-inch steel. It replaces the factory independent coil shock with a massive 2.5in piston, nitrogen-charged, 8-stage adjustable Vertex Coilover. The Vertex Coilovers feature a monotube design with an external reservoir for increased oil capacity and damping sensitivity. The 2.5in piston design offers 56% greater fluid capacity than average reservoir shocks, providing optimal damping control.
Installation. This kit requires cutting and drilling for installation, with an estimated timeframe of 6-10 hours. It can be installed at home efficiently and quickly.
Limited Lifetime Replacement Warranty. Backed by a limited lifetime replacement warranty against manufacturer defects, Rough Country's 4-Link Coilover Conversion Lift Kit is protected from structural and workmanship damage post-purchase. Enjoy peace of mind with Rough Country's Suspension products!
Features:
- Easy bolt-on installation
- Increased ground clearance
- Levels the front with the rear of the vehicle
- Radius arm drop brackets for proper caster
- Fabricated blocks for strength and longevity
- Anti-axle wrap rear blocks for stock ride quality
Notes:
- Models with a 10-speed transmission must remove dial pin
- Does NOT fit gas engine models
- Does NOT fit manual shift transfer cases
- Does NOT fit dually models
- Does NOT work on models with Tremor Factory Trim Package
- New fabricated lift block replaces factory equipped lift block
Install Time: 6-10 hours
Front Components:
Vertex Coilovers, Fixed Upper Control Arms, Adjustable Lower Control Arms, Radius Arm Drop Brackets, Sway-Bar Drop Brackets, Track Bar Drop Bracket, Stabilizer Relocation Brackets, Pitman Arm, Brake Line Brackets, Bumpstop Spacers, Hardware
Rear Components:
Fabricated Anti-Wrap Lift Blocks, Carrier Bearing Drop Bracket, Brake Line Brackets, U-Bolts, Hardware
Tire, Wheel, and Offset Info:
Various tire sizes with corresponding wheel sizes and offsets are compatible with this lift kit. Minor trimming may be required for certain combinations.
Title:
Rough Country 6 Inch Lift Kit - 4-Link - OVLD - C/O Vertex - Ford Super Duty (17-22)
Specs
- SKU: HEC 56057
- UPC: 840269914812
- Weight: 123.45 LBS
- Data Default Qt: 1
- Data Product Type: Mom Class Bolt-on
- Data Shipping Group: HEC shipping
- MPN: 56057
Fitment
| Make | Model | Sub-model | Years |
|---|---|---|---|
| Ford | F-250 Super Duty | King Ranch | 2017-2022 |
| Ford | F-250 Super Duty | Lariat | 2017-2022 |
| Ford | F-250 Super Duty | Limited | 2018-2022 |
| Ford | F-250 Super Duty | Platinum | 2017-2022 |
| Ford | F-250 Super Duty | XL | 2017-2022 |
| Ford | F-250 Super Duty | XLT | 2017-2022 |
| Ford | F-350 Super Duty | King Ranch | 2017-2022 |
| Ford | F-350 Super Duty | Lariat | 2017-2022 |
| Ford | F-350 Super Duty | Limited | 2018-2022 |
| Ford | F-350 Super Duty | Platinum | 2017-2022 |
| Ford | F-350 Super Duty | XL | 2017-2022 |
| Ford | F-350 Super Duty | XLT | 2017-2022 |
| Notes: | Models equipped with a 10-speed transmission must remove dial pin. Does NOT fit gas engine models. Does NOT fit manual shift transfer cases Does NOT fit dually models. New fabricated lift block replaces the factory equipped lift block. Does NOT work on models equipped with Tremor Factory Trim Package. | ||